STEP 3: Remove the Blanking Cover.
STEP 4: Insert The Card.
STEP 5: Secure the Card into Your PC
PCI Quad 422/485 Card
Choose an empty expansion slot. This Card will fit into one of the white PCI
slots on your motherboad. Remove the blanking cover protecting the slot on the
PC back panel. KEEP the blanking cover screw safely for later.
Now insert the card in the slot. Be careful to ensure that the gold plated pcb
fingers fits neatly into the I/O expansion connector. Press down firmly but
evenly on the top of the card.
The 9 pin D connector should fit neatly through the slot's aperture to the outside
world.
Use the screw kept back from the blanking cover to screw the retaining bracket
into the PC back panel housing.
Chapter 3 Installing the Card x 12