Table of Contents
Advertisement
Click OK, the Setup Program Main Screen is displayed:
By default, all component options will be installed, selecting the "Del All"
button will select all installed components for deletion and "Add All" chooses all
uninstalled components for installation; options may not be changed when the
components are installed. For further details on the Component Options consult
the README.TXT file on the supplied disk.
If only logical ports COM1 to COM9 are to be used then de-select the Comms
API library option in the "Install" column. This library is only necessary to allow
the use of logical ports greater than COM9 e.g. COM10, COM11 etc.
When you have made your choice of Component Options click Continue and
when the setup program has finished select the Done button.
Note: If the Serial Port driver options has been selected, after the setup program
has finished, Windows will display a restart message - answer Yes and Serial
Solutions will be ready to run upon Windows restarting.
Serial Port Installation.
From Main, select Control Panel:
Double -click on Serial Ports:
Chapter 5 Windows 3.x Software Configuration. x 18
PCI Quad 422/485 Card
Advertisement
Table of Contents
