PCI 3 Port RS232
Note: The values used in the above section were those
returned by the BBCARDS program, as described in the
above section.
When you have finished, click on OK. A restart message
will be displayed; to save time restart only when both ports
have been added and correctly configured.
Repeat the above process to add the other COM ports of the
PCI 3Port RS232, the COM base for the second port will be
0148, the third 0150 (the fourth for 3+1 Port users will be
0158); the IRQ value will remain the same. After adding the
remaining COM ports the COM Ports Window will look
similar to the following:
Configuring The COM Ports.
From the COM Ports window choose the port that you wish to
configure and click on Settings - the following dialogue will
be displayed:
Software Configuration
Chapter 3 Page 29