Table of Contents
Advertisement
In this window, the COM port assignment may be changed, simply by selecting
a new COM port value from the pull down menu relevant to the port. However,
COM port usage other than those for the PCI Quad Opto RS422/485 card itself
are not checked, so it is advisable to first check which COM ports are in use -
port availability can be checked by viewing the Device Manager:
All COM ports present will be listed under the entry "Ports (COM & LPT)."
The above screenshots indicates that COM2 - 4 and COM9 and above are not
installed, and therefore may be used.
The Maximum Baud Rate Setting for all ports on the card may also be set
from this window. This settting will make the maximum baud rates of all the
ports on this card equal to whatever is set. Individual ports may have their
settings changed as shown in Port Settings
Port Settings
Using the right-hand mouse button click on the My Computer icon on your
desktop.
Click on Properties.
Chapter 6 Windows 95 Software Configuration x 26
PCI Quad 422/485 Card
Advertisement
Table of Contents
