Chapter 6 Windows 95
Software Configuration
Introduction
PCI Quad 422/485 Card
To obtain a trouble free mix-and-match of the COM ports:
Switch off your computer, insert your PCI RS422/485 card into a free PCI slot,
as described in Chapter 3, and switch your computer on again.
During the booting process, Windows 95 will detect the PCI Quad Opto
RS422/485, but will display it simply as a "PCI CARD", and you will briefly see
a message box to this effect.
Windows will then display the "Update Device Driver Wizard", which asks you
to "insert any disk which came with the PCI card". Insert the Serial Solutions
CD ROM into an appropriate drive and click 'Next'.
The Wizard should then display the following:
Click Other Locations
Chapter 6 Windows 95 Software Configuration x 22