Table of Contents
Advertisement
Chapter 8 Windows NT 4.0
Installation.
Introduction
Software Installation.
PCI Quad 422/485 Card
Microsoft Windows NT Provides built in support for 255 standard serial ports.
To setup your PCI RS422/485 serial card you should follow these steps. Please
note that to change any kind of hardware configuration under Windows NT you
must be logged in as a user with Administrator level privileges, if you do not
have these please contact your system administrator.
Insert the PCIQuad Opto RS422/485 into your PC, as described in chapter 2, and
restart. Place the supplied CDROM titled "Serial Solutions Software" in a
suitable drive and from the Start Menu choose Run
Enter <drive>:\diskimg\ssnt\setup (where <drive>: is the path to the
CDROM drive containing the installation disk).
Chapter 8 Windows NT 4.0 Installation. x 40
Advertisement
Table of Contents
