Table of Contents
Advertisement
PCI DUAL RS232
returned by the BBCARDS program, as described in the
above section.
When you have finished, click on OK. A restart message
will be displayed; to save time restart only when both ports
have been added and correctly configured.
Repeat the above process to add the second COM port of the
PCI Dual RS232, the COM base will be 0148; the IRQ value
will remain the same. After adding the remaining COM port
the COM Ports Window will look similar to the following:
Configuring The COM Ports.
From the COM Ports window choose the port that you wish to
configure and click on Settings - the following dialogue will
be displayed:
Software Configuration
Chapter 3 Page 31
Advertisement
Table of Contents
