AT&T MERLIN II Manual page 4

Remember to set the current date and time for the MERLIN 11 Attendant. Refer to the
NOTE:
programming information that came with the unit for further information. If you do not set the
MERLIN II Attendant clock, the unit remains in Day mode at all times.
Enter authorized caller mode.
1.
a Dial the MERLIN II Attendant extension number from a Touch Tone phone, preferably a single-line
set.
b for an answer.
Wait
Dial * immediately followed by your authorized caller code and #.
c
The two-beep confirmation tone sounds.
NOTE: If you are programming from a multiline Touch-Tone phone connected to the MERLIN II
system control unit, you must enter an additional pound ( # ) sign each time a pound ( # )
sign appears in a programming command.
Dial *74 followed by a code for the day of the week.
2
Sunday, (2) Monday, (3) Tuesday, (4) Wednesday, (5) Thursday, (6) Friday, (7) Saturday.
(1)
Dial one digit to indicate whether your business is open or closed for the day you specified.
3
Open, Closed.
(1) (2)
The two-beep confirmation tone sounds.
If you hear the three-beep (error) tone, return to step 2.
NOTE:
Repeat steps 2 and 3 of this procedure for each day of the week.
4
Continue programming.
5
or
Exit authorized caller mode by dialing *#.
To disconnect, dial #.
6
2 MERLIN II Attendant Planning Form A
How to Program: