Table of Contents
Advertisement
6
USE AND OPERATION
❑ Programming and manual functions controls
28_053_2.bmp
1-
Key to select bar feeder manual operation.
2-
Key to select bar feeder automatic opera-
tion.
3-
Key to select the bar feeder semiautoma-
tic function.
4-
Key to control a step-by-step operating
cycle. If pressed, the bar feeder performs
the first step, if pressed again the bar fee-
der performs the second step, and so on.
5-
Key to lift the bar lifting device
6-
Key to lower the bar lifting device
7-
Key lifting the guide
8-
Key lowering the guide
11-
Key for bar pusher backward manual
motion at high speed.
Key for bar pusher backward manual
12-
motion at low speed.
13-
Key for bar pusher forward manual
motion at low speed.
14-
Key for bar pusher forward manual
motion at high speed.
15-
Key for "BAR FEEDER ZERO SETTING".
It must be pressed only after key
S 73
carriage has started moving, they can
be released.
16-
TKey to adjust the motor for the bar
pusher motion. Never press it during
daily operation of bar feeder.
Bar pusher lifting key
17-
18-
Bar pusher lowering key
19-
"RESET" key.
20-
Key to recall "MAIN MENU".
20
MAIN
- 34 -
has been pressed; once the
Hide quick links:
Advertisement
Chapters
Table of Contents
