Guide Lifting Limit Switch - Adjustment - IEMCA VIP 80 Manual For Use And Maintenance

5
ADJUSTMENTS AND SETUP
5.3.5 Guide lifting limit switch -
Adjustment. (fig. 7)
When the bar A, is on the lifted guide B, its axis must
coincide with the loading axis. The lifting limit switch
must be adjusted according to the stock diameter and
shape.
To adjust it, proceed as follows:
– press
to start the feeder;
– press
to select the manual function;
– press to lift the guide;
– adjust the guide lifting limit stop through screw
C (fig. 8) and check the adjustment through the gra-
duated scale D.
A
28_047_1.bmp
28.048 Ec.1
- 30 -
A
B
7
C
B
D
8