Table of Contents
Advertisement
Set point step for selection of temperature display in
whole and half degrees
Base screen mode
Set point step
Commissioning
Select>
<Exit
Figure 19.
Image for selecting the base screen mode and image for the Base screen mode
function.
1.
Go to the Service menu.
2.
Highlight Settings.
Press OK or on the ► Right key.
3.
4.
Highlight the Set point step.
Press OK or the ► Right key.
5.
Change by pressing the ▲ UP key or ▼ DOWN key to choose between
6.
temperature display in whole or half degrees.
7.
Press OK to confirm the change and return to the Settings menu.
Return to the Service menu by pressing the ◄ Left key.
8.
Commissioning
Backlight
Basescreen mode
Commissioning
<Exit
Select>
Figure 20. Image for selecting commissioning and image for the Commissioning function.
1.
Go to the Service menu.
2.
Highlight Settings
Press OK or press on the ► Right key..
3.
4.
Highlight Commissioning.
Press OK or on the ► Right key.
5.
Change by pressing the ▲ UP key or ▼ DOWN key to choose between
6.
Water and Air
7.
Press OK to confirm the change and return to the Settings menu
Return to the Service menu by pressing the ◄ Left key.
8.
Set point step
[0,5°C]
<Exit
Commissioning
Water
AIR
<Exit
<Exit
20210201
Swegon reserves the right to make design changes.
CONDUCTOR W4
Commissioning
Cool valve
Heating valve
51
Advertisement
Table of Contents
