Swegon CONDUCTOR W4 Technical Manual page 48

CONDUCTOR W4
Change language
<Exit
Figure 13. Image for selecting Language and the Language image.
1.
2.
3.
4.
5.
6.
7.
8.
To enable/disable the "first open" function
<Exit
Figure 14. Image for selecting FirstTime function and the FirstTime function image.
1.
2.
3.
4.
5.
6.
7.
8.
48
Swegon reserves the right to make design changes..
RF Quality
Language
FirstTime func
Select>
Go to the Service menu.
Highlight Settings.
Press OK or on the ► Right key.
To highlight Language.
Press OK or on the ► Right key.
Select between the languages Swedish, English, Finnish, French and
Russian by pressing the ▲ UP or ▼ DOWN key.
Press OK in order to confirm the change and return to the Settings
menu.
Return to the Service menu by pressing the ◄ Left key.
Language
FirstTime func
Temp. calibration
Select>
Go to the Service menu.
Highlight Settings.
Press OK or on the ► Right key.
Highlight FirstTime function.
Press OK or on the ► Right key.
Enable the function by selecting [On], disable by selecting [Off].
Press OK in order to confirm the selection and return to the Settings
menu.
Return to the Service menu by pressing the ◄ Left key.
Language
[Swedish]
<Exit
FirstTime func
[Off]
<Exit
20210201