Remote Fax Commands - Brother MFC-8370DN User Manual

Chapter 9

Remote fax commands

Follow the commands below to access features when you are away from the machine. When you
call the machine and enter your Remote Access Code (3 digits followed by l), the system will give
two short beeps and you must enter a remote command.
Remote commands
95 Change the fax forwarding or
fax storage settings
1 OFF
2 Fax Forwarding
4 Fax Forwarding number
6 Fax Storage
96 Retrieve a fax
2 Retrieve all faxes
3 Erase faxes from the memory
97 Check the receiving status
1 Fax
98 Change the Receive Mode
1 External TAD
2 Fax/Tel
3 Fax Only
90 Exit
70
Downloaded from ManualsPrinter.com Manuals
Operation details
You can choose Off after you have retrieved or erased all your
messages.
One long beep means the change is accepted. If you hear three
short beeps, you cannot change because the conditions have
not been met (for example, registering a fax forwarding
number). You can register the maximum number of rings. (See
Changing the Fax Forwarding number on page 69.) Once you
have registered the number, fax forwarding will work.
Enter the number of a remote fax machine to receive stored fax
messages. (See Retrieving fax messages on page 69.)
If you hear one long beep, fax messages have been erased
from the memory. (The machine will print any unprinted faxes
in memory before erasing them.)
You can check whether your machine has received any faxes.
If yes, you will hear one long beep. If no, you will hear three
short beeps.
If you hear one long beep, your change has been accepted.
Press 9 0 to exit remote retrieval. Wait for the long beep, then
replace the handset.
9