Connection Of The Compiled Failure Alarm Indicator (Cm2 Only) - Viessmann VITOTRONIC 100 GC1 Installation And Service Instructions Manual

Connection of the Compiled Failure Alarm Indicator (CM2 only)

9
A
B
Installation
Rated voltage: 120 VAC 60 Hz
Rated current: max. 2 FLA
Recommended connection
wire size: AWG 14
1. Disconnect power to control and
burner.
2. Connect the compiled failure alarm
as shown in the diagram.
A Connect terminal strip in
connection enclosure of boiler
control
B Visual and/or audible alarm
device (120 VAC)
77