Gas Flue Temp. Sensor (Optional For Cm2 Equipped With Ss Flue Collector) - Viessmann VITOTRONIC 100 GC1 Installation And Service Instructions Manual

Installation
Flue Gas Temp. Switch (mandatory for PP(s) material collectors)
(CM2 only)
72
CAUTION
Please note that the diagram shown
is only a simplified conceptual
drawing of a flue gas temperature
switch. Refer to the manual specific
to the device for interconnection
details.
1. Disconnect power.
2. Remove 150 plug from the
Vitotronic control and discard.
3. Install new 150 plug supplied
(attached to flue gas temperature
switch).