Coding 1; Call Up Coding Level 1; Codings - Viessmann VITOTRONIC 100 GC1 Installation And Service Instructions Manual

Coding 1

Call up coding level 1

Codings

Coding as per Function
factory setting
Address: Value
00: 1
System
type
01: 1
System
type
02: 1 02: 1
Boiler/ Boiler/
burner burner
03: 0
Boiler/
burner
05: 70 05: 70
Burner Burner
(mod.) (mod.)
06: 87
Boiler/
burner
1. Press and
approx. 2 seconds.
2. Call up the required coding address
with the
press
3. Change the value with the
button; press
4. Press and
approx. 1 second.
System circuit A1
without domestic hot water
heating
Single-boiler system
Operation with two-stage Operation with two-stage
burner burner
Gas-fired operation
Burner curve Burner curve
Max. limit of boiler water
temperature set to
87°C / 189°F
simultaneously for
or button;
to confirm.
or
to confirm.
simultaneously for
New coding Possible change
Address:Value
00: 2 System circuit A1
with domestic hot water heating
01: 2 Multi-boiler system with cascade control
via LON BUS (e.g. Vitotronic 333, Type
MW1)
01: 3 Multi-boiler system with cascade control
via switch contacts (input aVD and aVH)
or 0-10V input module
02: 0 Operation with single-stage burner
02: 2 Operation with modulating burner
03: 1 Oil-fired operation
(coding cannot be reset)
05: 0 Burner curve linear
05: 1 Burner curve not linear:
to
05: 99 Partial output in kW (at g of the
Operating
time of the actuating drive)
Max. output in kW
= Partial output in %
06: 20 Maximum boiler water temperature limit
to variable between
06:127 20 and 127°C / 68°F and 261°F
Additional information
Access coding level 1.
The first arrow appears in the
display.
Address flashes.
Value flashes.
The value is stored and stops flashing
for approx. 2 seconds. Then the
address flashes and further addresses
can now be selected with the
button.
Exit coding level 1.
x100%
or
115