AEG BSE576321M User Manual page 32

32 www.aeg.com
3. Turn on the oven and set the
function: True Fan + Steam. Set the
temperature between 130 and 230
°C. Turn off the oven after 10
minutes.
Let it cool down and continue with the
removal of the tank contents. Refer to
"Daily Use" chapter, Emptying the water
tank.
4. Rinse the water tank and clean the
remaining lime residue in the oven
with a cloth.
5. Clean the drain pipe by hand in warm
water with soap. To prevent damage,
do not use acids, sprays or similar
cleaning agents.
10.6 Removing and installing
door
The oven door has two glass panels. You
can remove the oven door and the
internal glass panel to clean it. Read the
whole "Removing and installing door"
instruction before you remove the glass
panels.
The oven door may close if
you try to remove the
internal glass panel before
you remove the oven door.
CAUTION!
Do not use the oven without
the internal glass panel.
1. Fully open the door and find the
hinge to the right side of the door.
2. Use a screwdriver to lift and turn fully
the right side hinge lever.
3. Find the hinge to the left side of the
door.
4. Lift and turn the lever fully on the left
hinge.
5. Close the oven door halfway to the
first opening position. Then lift and
pull forward and remove the door
from its seat.