Table of Contents
Advertisement
3
SYSTEM SETUP
3.1 Installing HDD/SDD Storage Devices
Step 1 Remove screws from 2.5" storage bracket (marked in red).
Step 2 Remove 4pcs M3x4 screws of SSD/HDD Tray from back cover.
Step 3 Lock up 2.5" SSD/HDD on HDD bracket and plug-in SATA data and
power cable to SSD/HDD.
Step 4 Lock up 4pcs screws (marked in yellow) to fix the SSD/HDD on the tray.
Step 5 Lock up screws on panel chassis (marked in red).
Note 1 : We strongly recommend you to buy wide temp. RAM and pre-install by
VECOW for MTC-1010W series panel pc.
Note 2 : We strongly recommend you to buy storage and pre-install by VECOW
for MTC-1010W, 10.1" Multi-touch panel pc.
©Vecow MTC-1000 User Manual
SYSTEM SETUP
18
Advertisement
Table of Contents
