B Error Descriptions - Fluke 9640A Series Instruction Manual

9640A On-Screen Error Messages
The following paragraphs contain lists of on-screen error messages. Some of the
messages indicate fatal errors from which the Instrument cannot recover. Others indicate
recoverable conditions, and some indicate operational errors or provide user
advice/information. Each of the messages imply or include an action for recovery.
Fatal – Potential Hazard to Connected Equipment
These messages indicate internal hardware faults that must be rectified at a Fluke Service
Center. When one of these errors occur, the user interface will cease operation, and the
Instrument will switch to Standby. The instrument should be turned off. Typically, these
errors are non-recoverable.
•
Internal Hardware Failure (SPI); Contact Service Center
•
Internal Hardware Failure; Synth Board not detected; Contact Service Center
•
Internal Hardware Failure; Output Board not detected; Contact Service Center
•
Internal Hardware Failure (FPGA); Contact Service Center
•
Internal Hardware Failure (Inguard Power Supply); Contact Service Center
•
Internal Hardware Failure: FPGA read/write error; Contact Service Center
Appendix B
Error Descriptions
B-1