SWEep Subsystem
Keyword
:SWEep
:SWE:STATe?
:SWE:TIME?
:SWE:DWELl[?]
:SWE:SPACing[?]
:SWE:STEP[?]
:SWE: SQUelch[?]
:SWE:PROGress?
:SWE:ACTion
*RST
Parameter Form
Condition
n/a
n/a
<NRf>
100 ms
<name>
{LINear
|
LIN
LOGarithmic}
<NRf>
1.0 kHz
<bool>
OFF
n/a
<name>
{PAUSe
|
n/a
CONTinue}
SCPI Commands
SCPI Command Reference
Notes
Command long form
This command node is only available
when the SWEEP instrument is
selected.
Query only, this returns the current
state of the sweep: STOP, ARM, RUN
or PAUS
Query only, this returns the duration of
the sweep
Controls the amount of time spent at
each point during a sweep.
Selects which type of sweep is
performed.
Selects the frequency for each step of
the sweep.
Select / deselect Squelch during
transitions.
Query only to return how far through
the sweep is. This will report 0.0 if the
sweep has never started, and 100% if
it has completed.
This will pause and continue a sweep
that is in progress. A settings conflict
will be reported if the sweep is not in
progress. There is no query form.
4C
4C-13