Specifications; General Specifications - Fluke 9640A Series Instruction Manual

Only to older units with firmware up to lss 2.x
Table of Contents

Advertisement

Specifications

General Specifications

Performance
Standard Interfaces
Warmup Time
Temperature
Relative Humidity
Altitude
Safety
EMC
Line Power
Power Consumption
Dimensions
Weight
[1]
Type tested for operation and functionality 90 to 132 V rms and 180 to 264 V rms at 47 to 63 Hz.
433 mm (17.0")
All specifications apply to a 1 year calibration interval at an ambient temperature
of Tcal ±5 °C.
Nominal factory Tcal calibration temperature 23 °C.
IEEE488.2 (GPIB)
60 minutes
0 °C to 50 °C
Operating:
5 °C to 40 °C
Specified Operation:
-20 °C to +70 °C
Storage:
Operating or Storage:
Non-condensing, 5 °C to 30 °C <95 %, <40 °C <75 %, <50 °C <45 %
Operating: ≤2,000 m
Non-operating: ≤12,000 m
EN 61010-1:2001, CAN/CSA 22.2 No 61010-1:2004 and UL 61010-1:2004,
indoor use only, pollution degree 2, installation category II.
EN 61326:2006 Class B.
Rating: 115 V/ 230V nominal
≤250 VA
433 mm (17.0") wide, 146 mm (5.8") high and 533 mm (21.0") deep. Mounts
within industry-standard 19" (483 mm) rack-mount frames when fitted with Y9600
rack mounting kit.
18 kg (40 lbs)
9640A Dimensions
Introduction and Specifications
[1]
533 mm (21.0")
1
Specifications
1-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

9640a-lpn9640a-std

Table of Contents