Intel ISP1100 Installation Manual page 18
Scsi cable option kit for internet server
Hide thumbs
Also See for ISP1100:
- Product manual (81 pages) ,
- Quick start manual (32 pages) ,
- Installation manual (20 pages)
Advertisement
Reinstall the Riser and Add-in Card(s)
1.
Align the riser card edge connector with the mating riser connector (A) on the
server board.
2.
Press the riser/add-in card(s) straight down into the mating connector on the
server board.
3.
Fasten the retention bracket (B) to the server back panel with two screws (C).
Note: If there's slack left in the SCSI cable, fold the slack into an accordion (D). This
prevents potential airflow problems.
D
16
Intel ISP1100 Internet Server SCSI Cable Kit
A
C
B
OMO9799_R
Advertisement
