Intel ISP1100 Installation Manual page 19
Scsi cable option kit for internet server
Hide thumbs
Also See for ISP1100:
- Product manual (81 pages) ,
- Quick start manual (32 pages) ,
- Installation manual (20 pages)
Advertisement
Reinstall the 3.5” Floppy Drive
1.
Slide the front of the drive into the front panel opening (A).
2.
Holding the back end of the drive at an angle, connect the data cable (B).
3.
Set the drive down and connect the power cable (C).
4.
Fasten the drive in the chassis with three screws (D).
Note: Before you fasten the drive in the chassis, make sure the data cables are
tucked smoothly under the drive and are not crimped.
A
D
C
Intel ISP1100 Internet Server SCSI Cable Kit
B
OMO9767A
17
Advertisement
