Intel ISP1100 Installation Manual page 9

Scsi cable option kit for internet server

Hide thumbs Also See for ISP1100:

Install the SCSI Hard Drive(s) in the Bracket(s)

For each SCSI hard drive:

Configure the SCSI ID for the drive according to the manufacturer's guide.

Place the drive in the mounting bracket. Orient it with the component side down,

and the front of the drive facing the front of the mounting bracket (A).

Align the mounting bracket screw holes (B) with the matching holes (C) in the

drive housing.

Fasten the mounting bracket to the drive using the four screws (D) that were

holding the IDE drive in the bracket.

Note: Do not overtighten the screws. The bracket sides can bend inward, which

can affect the alignment of the bracket tabs with the slots in the chassis.

Intel ISP1100 Internet Server SCSI Cable Kit

OM09766