Intel ISP1100 Installation Manual page 13

Install the SCSI Cable
1. Place the SCSI cable (A) in the chassis and slide it under the retention bracket
(B). The "accordion" section (C) must be placed on the right side of the retention
bracket. Note the location and orientation of the SCSI terminator (D).
• Turn the part of the cable that goes under the retention bracket so the cable (A)
is at an angle (not perpendicular) to the head of the retention bracket (B).
• Gently slide the cable under the retention bracket, being careful not to scrape it
against the retention bracket.
2. Make sure the cable is not on top of the PEM nut (E).
A
E
C
B
C
D
Intel ISP1100 Internet Server SCSI Cable Kit
A
D
OMO9777_R
11