Installing The Display Assembly; Removing The System Fan - Dell NOT22679 Owner's Manual

Installing the Display Assembly

1. Insert the LVDS and wireless antenna cables through the holes on the base chassis and connect them.
2. Place the display assembly onto the computer.
3. Tighten the screws on both sides to secure the display assembly.
4. Route the antenna and the LVDS cables through the routing channel.
5. Connect the LVDS and camera cable to the computer.
6. Connect the antenna cables to the wireless solution.
7. Install:
a. palmrest assembly
b. keyboard
c. base cover
d. SD card
e. battery
After Working Inside Your Computer .
8. Follow the procedures in

Removing the System Fan

1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
30