Xerox 5750 System Administration Manual page 7

FCC notices . . . in the USA
Radio frequency
Safety Extra Low Voltage Approval
5750 SYSTEM ADMINISTRATION GUIDE
This equipment generates, uses, and can radiate radio frequency
energy, and, if not installed and used in accordance with the
instruction manuals, may cause interference with radio
communications. The equipment has been tested and found to
comply with the limits for a Class A computing device pursuant to
Subpart J of Part 15 of the FCC rules, which are designed to provide
reasonable protection against such interference, when the
equipment is operated in a commercial environment. Operation of
this equipment in a residential area is likely to cause an interference,
in which case the user, at his own expense, will be required to take
whatever measures are necessary to correct the interference.
Changes or modifications to this equipment that are not specifically
approved by the Xerox Corporation may void the authority that is
granted by the FCC to operate this equipment.
The Xerox 5750 Digital Color Printer/Copier is in compliance with
various governmental agencies and national safety regulations. All
system ports meet the requirements for Safety Extra Low Voltage
(SELV) circuits for connection to customer-owned devices and
networks.
Additions of customer-owned or third-party accessories that are
attached to the printer/copier must meet or exceed the requirements
listed above.
All modules that require external connection must be installed per
the 5750 installation procedure.
Notices
vii