Xerox 5750 System Administration Manual page 23

Program
No. Item
51 Attention Tone
52 Selection Tone
53 Fault Tone
55 Custom Paper Size
Setting (? on Paper
Size Indicator)
56 Odd Size Paper
setting
200 Default settings for
Marker Edit (available
only with an Edit Pad)
201 Register User Color
Scheme in Marker
Edit (available only
with an Edit Pad)
5750 SYSTEM ADMINISTRATION GUIDE
Tools Program Numbers Chart
Summary
This tone sounds when the warm-up cycle is completed
after power-up. There are four volume levels, ranging from
Loud to OFF
This tone sounds when a button is pressed. There are four
volume levels, ranging from Loud to OFF
This tone sounds when a operation error has occurred.
There are four volume levels, ranging from Loud to OFF
You can customize paper trays 1 through 4 to accept a
paper size not shown on the Paper Size Indicator at the
back of the tray. Enter the X and Y values for the ? setting.
You can change the type (Normal or Heavy Weight) of
paper for the Odd Size Paper selection on the Control
Panel.
You can change the default settings of Color Scheme and
Color Enhancement. The available color schemes are
Business, Warm, Calm, Vivid, and User Color Scheme.
Color Enhancement can be set to ON or OFF.
You can register a desired color for each Marker Pen for
both the point and loop method. Enter the respective color
content value for Magenta, Cyan, and Yellow. Refer to
Table 4 for the values of some of the most popular colors
and for black and white.
Factory Setting:
Red loop Magenta
Cyan
Yellow
Red point Magenta
Cyan
Yellow
Blue loop Magenta
Cyan
Yellow
Blue point Magenta
Cyan
Yellow
Green loop Magenta
Cyan
Yellow
Green point Magenta
Cyan
Yellow
100%
0%
63%
68%
0%
39%
32%
100%
22%
21%
65%
16%
4%
49%
100%
10%
37%
66%
1 TOOLS MODE
Factory
Setting
Normal
Normal
Normal
All markets:
X = 210mm
Y = 297mm
Normal
Color Scheme:
Business
Color
Enhancement:
OFF
See Summary
column
1-7