Xerox 5750 System Administration Manual page 51

5750 SYSTEM ADMINISTRATION GUIDE
6
Replace the existing color palettes under the palette cover on the
Edit Pad.
1. Cut each new color palette on the dashed line to trim away the
white paper. Set aside.
2. Remove the palette cover from the Edit Pad by pressing down
on both ends of the palette and pushing toward the center until
the cover buckles.
3. Remove the clear protective cover to expose the color palette
strips.
4. Place the new palette strips over the old strips and tape in place.
Notice the Roman Numerals printed on the end of each palette.
Roman Numeral is the palette for the top row. Roman Numeral
is the palette for the middle row. Roman Numeral
palette for the bottom row.
5. Reinstall the cover by inserting the tabs under the panel and
pushing the cover in place.
1 TOOLS MODE
is the
1-35