1 TOOLS MODE
1-28
4
Use the keypad to enter the X value. The size must be within the
range of 148 to 432 mm. Press the Start button.
Enter paper size for X value and press Start
(Range X: 148-432mm, Y: 148-297mm)
X: ___
Y:
5
Use the keypad to enter the Y value. The size must be within the
range of 148 to 297 mm. Press the Start button.
Enter paper size for Y value and press Start
(Range X: 148-432mm, Y: 148-297mm)
X: xxx
Y: ___
6
Press the * key until the Tools Program Number entry screen is
displayed.
C Clear
* Previous
C Clear
* Previous
5750 SYSTEM ADMINISTRATION GUIDE