Xerox 5750 System Administration Manual page 24

1 TOOLS MODE
Program
No. Item
211 Color Registration on
Custom Palette
212 Color Palette printing
option
734 Selection of interface
connector
735 Print Mode Entry
Time
1-8
Tools Program Numbers Chart
Summary
You can change the color of each of the 18 colors on the
Edit Pad Custom Palette by selecting the color with the
Edit Pen, then entering the values for magenta, cyan and
yellow.
Factory Setting:
1 Magenta 0%
Cyan 0%
Yellow 100%
2 Magenta 0%
Cyan 0%
Yellow 62%
3 Magenta 0%
Cyan 0%
Yellow 33%
4 Magenta 48%
Cyan 2%
Yellow 100%
5 Magenta 31%
Cyan 4%
Yellow 60%
6 Magenta 15%
Cyan 0%
Yellow 33%
7 Magenta 100%
Cyan 0%
Yellow 63%
8 Magenta 68%
Cyan 0%
Yellow 39%
9 Magenta 33%
Cyan 0%
Yellow 20%
If you register new colors on the Edit Pad Custom Palette,
you can activate this feature and print a pallet for the Edit
Pad showing the new colors.
You can select either RS 422 or Pseudo ECL, depending
on the interface connector to be used.
(Splash/SM ICS: RS 422
You can set the time (0 - 65,535 seconds, at intervals of 1
second) it takes to enter the Print Mode when the 5750
receives printing and scanning requests from external
equipment after completing a copy job (with the Job
Timeout feature activated) or during copying (with the Job
Program Incomplete Timeout feature activated). If you set
the time to 0 seconds, this feature is disabled.
10 Magenta 68%
Cyan 52%
Yellow 0%
11 Magenta 51%
Cyan 38%
Yellow 0%
12 Magenta 20%
Cyan 18%
Yellow 0%
13 Magenta 32%
Cyan 100%
Yellow 22%
14 Magenta 21%
Cyan 65%
Yellow 16%
15 Magenta 10%
Cyan 33%
Yellow 7%
16 Magenta 0%
Cyan 75%
Yellow 77%
17 Magenta 1%
Cyan 50%
Yellow 50%
18 Magenta 0%
Cyan 24%
Yellow 30%
RM ICS L: Pseudo ECL)
5750 SYSTEM ADMINISTRATION GUIDE
Factory
Setting
See Summary
column
Off
RS 422
30 seconds