Xerox 5750 System Administration Manual page 22

1 TOOLS MODE
Program
No. Item
38 Black Medium
Density
39 Black Low Density
40 Color Saturation
41 Sharpness
42 Maximum number of
copies
43 Maximum number of
two-sided copies
44 Job Timeout
45 Job Program
Incomplete Timeout
46 Power Saver Mode
47 Electronic Key
Password
48 Tools Password
49 User account
numbers and
passwords
50 User Password
feature
1-6
Tools Program Numbers Chart
Summary
You can change the default for Black Medium Density.
You can change the default for Black Low Density.
You can change the default to adjust the Color Saturation
under the Image Quality feature to one of five levels.
You can change the default to adjust the Sharpness under
the Image Quality feature to one of five levels
You can set the maximum number of copies allowed for a
copy job from 1 to 99.
You can set the maximum number of copies allowed for a
two-sided copy job from 1 to 25.
Sets the time (0 - 6 minutes, at intervals of 1 minute) it
takes to return to the default settings after completion of a
copy job.
Setting the time to 0 disables this feature.
Sets the time (0 - 6 minutes, at intervals of 1 minute) it
takes to return to the default settings from the time of
inaction.
Setting the time to 0 disables this feature.
You can change the default settings of the Power Saver
Mode. There are four types of modes. Each has a unique
power consumption ratio and times to enter the mode.
The Electronic Key Password is used to enable the
operation of the 5750. When a password is registered, the
Electronic Key Password screen is activated and is
displayed immediately after switching on the power. You
can select one password consisting of four digits from
0000 to 9999.
Setting the password to 0000 disables this feature.
The Tools Password is used to enter the Tools Mode. You
can select one password consisting of four digits from
0000 to 9999.
To limit the use of the 5750, the System Administrator can
create a maximum of 50 user accounts. Each account is
assigned a password, and usage can be limited to color
copies, black and white copies or no limits. If you have the
Auditron feature, 100 user accounts can be created. Refer
to the Auditron Administration Guide.
Before registering any user passwords, the System
Administrator must activate this feature.
Factory
Setting
4
4
3
3
99
25
2 minutes
2 minutes
Type 3
Mode Entry
Time: 10 min.
Mode Delay
Time: 30 sec.
0000
0123
None
OFF
5750 SYSTEM ADMINISTRATION GUIDE