Starting The Controller - GRAPHTEC OPS675 User Manual

Starting the Controller

The controller can be started either from the print menu in the application software or the Start menu
on the desktop.
CAUTION
· To use the controller, [USER PRIORITY] in the plotter must be set to [KEYPAD/BY PC]. For more information on
the setting, see Chapter 4 "Convenient Functions" in User's Manual.
· Before starting the controller, make sure that your computer and the plotter are connected properly and that
media is set in the plotter.
· Cuttings other than test and cross cuttings cannot be done when you start the controller from the Start menu.
· To start the controller from the print menu, [Start up the controller] must be checked. This option is in the
[Options] tab of [Printing Preferences] in the driver software.
Reference
For more information on operating the controller screen, see "Nomenclature (Main Screen)" ( page 9).
Starting from the Print Menu
1. Open an image that you want to plot in the appropriate application software.
2. Select the print command from the menu.
Reference
Operations are different depending on the types of application software. For more information, see the manual
provided with the application software.
3. Select the plotter from the printer list.
*The screen image above is an example from a Microsoft WordPad print screen.
7
1. In t ro d u c t io n t o t h e C o nt roller