GRAPHTEC OPS675 User Manual page 17

Import/Export Functions for Tool Conditions
By using these functions, you can save a tool condition that is set in the controller to any location on your computer
or load a tool condition that has been saved to your computer. You can also save multiple tool conditions as a
single fi le and load the fi le. The extension of the fi les that can be imported or exported is ".GMIE".
1. Select a condition from the media list and click [Export].
2. Enter the fi le name in the [Save As] screen and specify the location to which you save
Export
the condition.
3. Click [Save] to save the setting fi le.
1. Click [Import].
Import
2. Select the fi le to load in the [Open] screen.
3. Click [Open] to load the condition and add it to the bottom of the list.
1 7
3. M an ag in g M ed ia L is t