Lights And Switches; Master Light Switch - MG GS Owner's Handbook Manual

INSTRUMENTS AND CONTROLS

Lights and Switches

Master Light Switch

1 AUTO Lamp
2 Side Lamp/Tail Lamp/Illumination
3 Headlamp
32
AUTO Lamp
With the ignition switch in position ACC, rotate the master
lighting switch to position 1. The AUTO lighting system
will automatically switch the side lamps, tail lamps and
instrument pack backlights on and off according to the
intensity of current ambient light.
With the ignition switch in position II, rotate the master
lighting switch to position 1. The AUTO lighting system will
automatically switch the side lamps, tail lamps, instrument
pack backlights and dipped beam headlamps on and off
according to the intensity of current ambient light.
With the master lighting switch in position 1 and lighting
on, the symbols on the switch illuminate green.
Note: This function uses a light sensor that monitors
exterior ambient light levels. It is fitted above the
instrument panel near the windshield. DO NOT mask
or cover this area. Failure to adhere to this may result
in dipped headlamps operating when not necessary.