Lights And Switches; Master Light Switch - MG RX8 Manual

Lights and Switches

Master Light Switch

3
2
1
4
1 AUTO Lamp
2 Side Lamp/Tail Lamp/Switch Backlights
3 Headlamp
4 Light Off
Instruments and Controls
AUTO Lamp
With the ignition switch in ACC position, the AUTO
lighting system will be defaulted as ON (1). The AUTO
lighting system will automatically switch the side lamps,
tail lamps and switch backlights on or off according to the
intensity of current ambient light.
With the ignition switch in ON position, the AUTO lighting
system will automatically switch the side lamps, tail lamps
and switch backlights as well as dipped beams on or off
according to the intensity of current ambient light.
Note: This function uses a light sensor that monitors
exterior ambient light levels. The sensor for some
models is fitted in front of the instrument panel near
the windscreen. DO NOT mask or cover this area.
Failure to adhere to this may result in headlamps
operating when not necessary.
Side Lamps, Tail Lamps and Switch Backlights
Rotate the master light switch to position 2 to switch on
the side lamps, tail lamps and switch backlights. With the
ignition switch in OFF position, if the side lamps stay on
1
37