Polaris PVCR 3000 Cyclonic PRO Operation Manual page 68

7 The left part of the
bumper gets stuck
8 The left wheel gets
stuck
9 The right wheel gets
stuck
10 The left wheel does
not work
11 The right wheel does
not work
12 Motor failure
13 The left lateral brush
gets stuck
14 The right lateral brush
gets stuck
15 Dust bag failure
16 The central brush gets
stuck
Troubleshooting during vacuuming.
# Problem
1 The vacuum cleaner
cannot be recharged.
2 The vacuum cleaner
jerks while standing.
3 The vacuum cleaner
directs to the charging
base before expiration
of the cleaning
program.
E 007 Check the bumper for sticking,
remove any contamination and
foreign items.
E 008 Check the wheel for sticking,
remove any contamination and
foreign items.
E 009 Check the wheel for sticking,
remove any contamination and
foreign items.
E 010 Check the wheel for sticking,
remove any contamination and
foreign items.
E 011 Check the wheel for sticking,
remove any contamination and
foreign items.
E 012 Given no obstacles, contact ASC.
E 013 Check the brush for sticking,
remove any contamination and
foreign items.
E 014 Check the brush for sticking,
remove any contamination and
foreign items.
E 015 Check the dust bag installation
correction
E 016 Check the central brush for sticking,
remove any contamination and
foreign items.
Possible reason
No contact with the base.
The base is not connected to the
adapter.
Engagement of a non-standard
adapter.
Something has wound around the
wheel drive or the brush drive
The vacuum cleaner directs to the
base at a low level of charge.
Power consumption rate differs
depending on the type of vacuumed
surfaces.
68
Recommended actions
Check correction of connection
between the vacuum cleaner and
the base.
Connect the base as per the
Operation Manual.
Use a standard adapter for
charging.
The vacuum cleaner tries to get free
automatically. If this is impossible
then help the device.
Charge the vacuum cleaner.
The time of autonomous operation
of the vacuum cleaner depends
complexity of a vacuumed room, on
the amount of debris, and on the
vacuuming mode.