Table of Contents
Advertisement
4. To activate the local cleaning mode, push
room (Fig. 9)
5. To bring the vacuum cleaner back to the base and to recharge it, push
CLEANUP PROGRAMS.
To improve the cleanup quality, the vacuum cleaner has got different programs which can be launched on the control
panel, or the control unit.
At switching over from the basic program to another mode with subsequent relaunch the basic program, then the
vacuum cleaner reschedule the cleanup path and can vacuum an area having been already cleaned.
Prior to run a cleanup program, make sure to energize the vacuum cleaner.
4.
Automatic Cleanup mode.
Under this mode, the vacuum cleaner firstly defines the area to be cleaned, then moves along parallel lines across
the defined area to vacuum it. To run it, touch the
control unit.
5.
Local cleanup mode
To activate the local cleanup mode, touch the
on the control unit. The vacuum cleaner starts the local cleanup of 1 sq.m. of a room
6.
Cleanup along walls.
To start Cleanup along walls, push the respective button
5.
Return-to-Base.
If the electric battery get discharged during cleaning, the vacuum cleaner automatically returns to the base. It can
also be directed to the base by pushing
6.
Turbo mode.
A push on
button in the control unit causes increasing the vacuum cleaner operation intensity up to "Turbo"
mode. One more push on this button reduces the vacuum cleaner cleanup power to the previous value.
SETTING THE CURRENT TIME AND THE CLEANUP START TIME.
By using buttons on the control panel you can set a desirable time of starting the cleanup. At that, the current time
shall also be set.
Having the timer pre-adjusted, the vacuum cleaner automatically turns on and starts cleaning daily at preset time.
Current time adjustment. (Fig. 11)
Push
button to turn on the vacuum cleaner. Push
set the week day, and
button to save adjustments. Without pushing the
If neither of these buttons is not pushed within 5 minutes, then the time adjustment mode resets.
Cleanup start time adjustment. (Fig. 12)
Under the Standby mode (see OPERATION, Section 3), you can access the mode of setting the week day and the
cleanup start time. Push the
to set the cleanup time.
This menu allows to set the cleanup start time separately for each of 7 week days, and to select days on which the
vacuum cleaner shall perform the cleanup.
button. The vacuum cleaner starts the local cleanup of 1 sq.m. of a
sensor on the vacuum cleaner control panel, or push the button
on the control unit or on the vacuum cleaner.
and
buttons to set hours and minutes. Once all the parameters are set, push
button. Then, use
button. (Fig. 10)
sensor on the vacuum cleaner, or push
on the control unit or on the control panel.
button to set the current time. Use
button, no adjustments can be saved.
button to set the week day, and
64
button on the
button to
and
buttons
Advertisement
Table of Contents
