Upright SB60 Service & Parts Manual page 3

Introduction
HOW TO USE THIS MANUAL
This manual is divided into 6 sections. The right hand
pages of each section is marked with a black tab that lines
up with one of the thumb index tabs on the right side of
this page. You can quickly find each section without
looking through the table of contents which follows this
page. The section number printed at the top corner of each
page can also be used as a quick reference guide.
SPECIAL INFORMATION
Indicates the hazard or unsafe practice will
result in severe injury or death.
Indicates the hazard or unsafe practice
could result in severe injury or death.
Indicates the hazard or unsafe practice could
result in minor injury or property damage.
NOTES: Give helpful information.
WORKSHOP PROCEDURES
CAUTION: Detailed descriptions of standard workshop
procedures, safety principles and service operations are not
included. Please note that this manual does contain warn-
ings and cautions against some specific service methods
which could cause personal injury, or could damage a
machine or make it unsafe. Please understand that these
warnings cannot cover all conceivable ways in which service,
whether or not recommended by UpRight, Inc., might be
done, or of the possible hazardous consequences of each
conceivable way, nor could UpRight Inc. investigate all such
ways. Anyone using service procedures or tools, whether or
not recommended by UpRight Inc., must satisfy themselves
thoroughly that neither personal safety nor machine safety
will be jeopardized.
All information contained in this manual is based on the latest
product information available at the time of printing. We
reserve the right to make changes at any time without notice.
No part of this publication may be reproduced, stored in
retrieval system, or transmitted, in any form by any means,
electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of the publisher. This
includes text, figures and tables.
SB60 Work Platform
Forword
Introduction &
Specifications
General description and machine specifications.
Operation
Operating instructions and safety rules.
Maintenance
Preventative maintenance and service information.
Troubleshooting
Causes and solutions to typical problems.
Schematics
Schematics and valve block diagram with
description and location of components.
Illustrated Parts
Breakdown
Complete parts lists with illustrations.
i
0
1.0
1.37
2.0
2.7
3.0
4.1
4.0
5.5
5.0
6.8
6.0
8.25
i