Hide thumbs Also See for SB-80:

Advertisement

S
PECIFICATIONS
Reach Envelope Diagram
ITEM
SPECIFICATIONS
Height
Working height maximum
86 ft.
Platform height maximum
80 ft.
Platform step in height
12 in.
Up and over height
7 ft. 6 in.
Drivable height
80 ft.
Horizontal outreach
72 ft.
Turret rotation
360° continuous
Platform rotation
180°
Tail swing
3 ft. 3 in.
Jib length
8 ft.
Jib arc
140°
Inside turning radius
10 ft.
Outside turning radius
23 ft.
Drive speed (lowered)
3.25 mph
Drive speed (elevated)
0.75 mph
Gradeability
Diesel 40% Gas 35%
Controls
Electric Proportional
Tires
15-22.5 x 16 ply
Tires (Plus3 option)
18-22.5 18 ply foam-filled
*Specifications subject to change without notice. Refer to Service Manual for complete parts &
service information. Meets or exceeds all applicable requirements of OSHA & ANSI A92.5-1992
TEL: (800) 559 926-5438 or (559) 891-5200
FAX: (559) 896-9012
PARTS: (888) UR-PARTS
PARTSFAX: (559) 896-9244
1775 Park St., Selma, CA 93662
http://www.upright.com
ITEM
SPECIFICATIONS
Dimensions
Platform size
6 ft. std. (8 ft. optional)
Guardrail height
45 in.
Toeboards
6 in.
Maximum platform capacity
600 lbs. (272 kg)
Maximum no. of occupants
2
Weight (gasoline)
32,000 lbs.
Weight (diesel)
32,500 lbs.
Overall height (stowed)
9 ft.
Overall length (stowed)
37 ft. 8 in.
Overall width (retracted)
8 ft. in.
Overall width (extended)
10 ft. 6 in.
Overall width (Plus3)
+ 4 in.
Wheel base
9 ft. 6 in.
Wheel track
59 in.
Ground clearance
11 in.
Power source (gasoline)
GM 3.0 liter 70 HP
Power source (diesel)
Perkins 1004-42 86 HP
System voltage
12VDC
Maximum hydraulic pressure
5000 psi
Local Distributor:
P/N 102320-000
102320-000-9903-.2-D
16
>_TaPc^a<P]dP[
SB-80
BTaXP[=^ c^2daaT]c
:$51,1*
All personnel shall carefully read, understand and follow all safety rules, operating instructions, and the Scaffold Industry
Association's Manual of Responsibilities (ANSI A92.5) before operating or performing maintenance on any Upright boom
supported aerial work platform.
B054CHAD;4B
Electrocution Hazard
Tip Over Hazard
NEVER operate the
NEVER operate the
machine within ten (10)
boom or drive with plat-
feet of power lines.
form elevated unless
THIS MACHINE IS
on firm, level surface.
NOT INSULATED.
(Plus3 machine 3°)
0;;
_SSe`Q^dc ]ecd gUQb Q^ Q``b_fUT VQ\\ bUcdbQY^d `b_`Ub\i QddQSXUT d_ TUcYW^QdUT `\QdV_b] Q^SX_bQWU
`_Y^d 1ddQSX _^\i _^U VQ\\ bUcdbQY^d d_ UQSX Q^SX_bQWU `_Y^d
=4E4A
UhSUUT ]QhY]e] `\QdV_b] \_QT _V &
\Rc "'" [W Q^T dg_ " _SSe`Q^dc
=4E4A
UhSUUT $% \Rc "
> _V cYTU V_bSU `Ub _SSe`Q^d
38BCA81DC4
Q\\ `\QdV_b] \_QTc UfU^\i _^ dXU `\QdV_b]
=4E4A
_`UbQdU dXU ]QSXY^U gYdX_ed VYbcd cebfUiY^W dXU g_b[ QbUQ V_b cebVQSU XQjQbTc ceSX Qc X_\Uc Tb_`
_VVc Re]`c SebRc _b TURbYc+ Q^T Qf_YTY^W dXU]
>?4A0C4
]QSXY^U _^\i _^ cebVQSUc SQ`QR\U _V ce``_bdY^W gXUU\ \_QTc
=4E4A
U\UfQdU dXU ]QSXY^U gXU^ gY^T c`UUTc UhSUUT "( ]`X !"% ]cUS
8= 20B4 >5 4<4A64=2H
`ecX U]UbWU^Si cd_` Redd_^ d_ TUQSdYfQdU Q\\ `_gUbUT Ve^SdY_^c
0;F0HB
S\_cU Q^T cUSebU c\YTY^W bQY\ QVdUb U^dUbY^W `\QdV_b] >5F5B UhYd _b U^dUb `\QdV_b] gXY\U U\UfQdUT
=4E4A
ecU \QTTUbc cSQVV_\TY^W _b _dXUb YdU]c d_ WQY^ XUYWXd+ g_b[ _^\i Vb_] dXU `\QdV_b] V\__b
=4E4A
S\Y]R T_g^ U\UfQdY^W QccU]R\i gXY\U `\QdV_b] Yc U\UfQdUT
8=B?42C
dXU ]QSXY^U dX_b_eWX\i V_b SbQS[UT gU\Tc \__cU _b ]YccY^W XQbTgQbU XiTbQe\YS \UQ[c \__cU gYbU
S_^^USdY_^c Q^T TQ]QWUT SQR\Uc _b X_cUc RUV_bU ecY^W
E4A85H
dXQd Q\\ \QRU\c QbU Y^ `\QSU Q^T \UWYR\U RUV_bU ecY^W
=4E4A
ecU Q ]QSXY^U dXQd Yc TQ]QWUT ^_d Ve^SdY_^Y^W `b_`Ub\i _b XQc TQ]QWUT _b ]YccY^W \QRU\c
85 0;0A< B>D=3B
gXY\U R__] Yc U\UfQdUT CD?@ SQbUVe\\i bUdbQSd R__] Q^T \_gUb `\QdV_b] gYdX_ed
b_dQdY^W =_fU ]QSXY^U d_ Q VYb] \UfU\ cebVQSU
=4E4A
QddQSX _fUbXQ^WY^W \_QTc _b ecU R__] Qc Q SbQ^U
=4E4A
Q\dUb _`UbQdY^W _b cQVUdi cicdU]c gYdX_ed ]Q^eVQSdebUbc gbYddU^ S_^cU^d
=4E4A
SXQbWU RQddUbYUc ^UQb c`Qb[c _b _`U^ V\Q]U 3XQbWY^W RQddUbYUc U]Yd Uh`\_cYfU XiTb_WU^ WQc
=4E4A
bU`\QSU Q^i S_]`_^U^d _b `Qbd gYdX Q^idXY^W _dXUb dXQ^ _bYWY^Q\ E`BYWXd bU`\QSU]U^d `Qbdc gYdX_ed
dXU ]Q^eVQSdebUbµc gbYddU^ S_^cU^d
=4E4A
d_g dXU ]QSXY^U DbQ^c`_bd Ri dbeS[ _b dbQY\Ub _^\i
05C4A DB4
 cUSebU dXU g_b[ `\QdV_b] Vb_] e^QedX_bYjUT ecU Ri deb^Y^W R_dX [UicgYdSXUc _VV Q^T bU]_fY^W
[Ui
2P[XU^a]XP ?a^_^bXcX^] %$ FPa]X]V
7Qc_\Y^U Q^T TYUcU\ U^WY^U UhXQecd Q^T c_]U _V dXUYb S_^cdYdeU^dc QbU [^_g^ d_ dXU CdQdU _V 3Q\YV_b^YQ d_
SQecU SQ^SUb RYbdX TUVUSdc Q^T _dXUb bU`b_TeSdYfU XQb]
Collision Hazard
Fall Hazard
NEVER position the
NEVER climb, stand
or sit on platform
platform without first
checking for over-
guardrails or midrail.
head obstructions or
other hazards.

Advertisement

Table of Contents
loading

Summary of Contents for Upright SB-80

  • Page 1 BTaXP[=^ c^2daaT]c :$51,1* All personnel shall carefully read, understand and follow all safety rules, operating instructions, and the Scaffold Industry Association’s Manual of Responsibilities (ANSI A92.5) before operating or performing maintenance on any Upright boom supported aerial work platform. B054CHAD;4B...
  • Page 2: Pre -Operation & Safety Inspection

    This manual covers the operation of internal com- Daily=each shift or every day or every 8 hours bustion powered models of the SB-80 Boom. This tenance. Inspection and maintenance shall be If you smell propane, close the supply valve on...
  • Page 3: Controls And Indicators

    1. While engaging the hand interlock, move the drive con- OTES trol handle forward and reverse. Observe that propor- tional functions operate smoothly, and that brakes apply quickly after control is released. 2. While engaging the hand interlock, operate steer switch to left and right.
  • Page 4: Operation

    OTES Service Horn At any time during operation, press the service horn button to sound an audible warning in necessary. :$51,1* ALWAYS wear an approved fall restraint Figure 1: Platform Controls properly attached to designated platform anchorage point when driving or operating the 17.
  • Page 5 Extending and additional height or reach. Retracting Axles Multifunction Controls The UpRight SB-80 employs the use of multifunction From the Platform Controls controls. This means that functions can operate at Important: Axles must be fully extended to full speed simultaneously.
  • Page 6: Lower Control Operation

    Lower Control Operation SB-80 Label Identification: All of the labels shown in Figure 14 shall be present and in good condition :$51,1* Elevating the Boom before operating the work platform. Be sure to read, understand and follow these labels when operating the work platform.
  • Page 7: Emergency Operation

    In the event of an engine failure, the elevating SB-80 Label Identification: All of the labels shown in Figure 13 shall be present and in good condition assembly may be lowered using the following proce- before operating the work platform. Be sure to read, understand and follow these labels when operating...
  • Page 8: Maintenance

    Tire selection can affect the stability of the machine. with the boom stowed and retracted. Engine running or Check specifications on back page, ensure that Use only tires supplied by UpRight (15-22.5 NHS stopped. (see figure 12) crane and slings are of correct capacity to lift Tubeless 16 Ply Rating) unless approved by the weight of unit.

Table of Contents