Upright SB60 Service & Parts Manual page 16

Section
3.1
SPECIAL TOOLS
The following is a list of special tools which may be
required to perform certain maintenance procedures
on the SB60 work platform.
SuperFlex Optimizer (P/N 100329-000)
Optimizer cord (P/N 100329-005)
0-1000 PSI Hydraulic Pressure Gauge
with Adapter Fittings (UpRight P/N 014124-010)
0-3000 PSI Hydraulic Pressure Gauge
with Adapter Fittings (UpRight P/N 014124-030)
0-6000 PSI Hydraulic Pressure Gauge
with Adapter Fittings (UpRight P/N 014124-060)
0-30 Gallon Hydraulic Flow Meter
With 0-3000 P.S.I. Simulated Load and Adapter
Fittings (UpRight P/N 67040-000)
Adapter Fitting (UpRight P/N 063965-002)
Inclinometer (UpRight P/N 010119-000)
Crimping Tool (UpRight P/N 028800-009
Terminal Removal Tool (P/N 028800-006)
Deutsch Field Kit (Small) (P/N 030899-000)
Deutsch Field Kit (Large) (P/N 030898-000)
Figure 3-1: Large Deutsch Field Kit
3-2
Maintenance
3.1 Preventative Maintenance
(Table 3-1)
The complete inspection consists of periodic visual and
operational checks, together with all necessary minor
adjustments to assure proper performance. Daily
inspection will prevent abnormal wear and prolong the
life of all systems. The inspection and maintenance
schedule is to be performed at regular intervals. Inspec-
tion and maintenance shall be performed by personnel
who are trained and familiar with mechanical and
electrical procedures.
Before performing preventative mainte-
nance, familiarize yourself with the opera-
tion of the machine.
Always block the elevating assembly when-
ever it is necessary to perform maintenance
while the platform is elevated.
Figure 3-2: Small Deutsch Field Kit
SB60 Work Platform