Fault Repair; Door Lock (A2) Does Not Lock; Service; Manually Opening Door Lock A2 - Miele W 4802 Technical Information

Technical Information
3

Fault Repair

3.1

Door Lock (A2) Does Not Lock

The door latch hits the locking mechanism when pushing into the door lock.
Cause:
The locking mechanism is locked, with the door open.
Remedy:
1. Open the door lock manually; refer to Section 020-4.1.
2. Check the function of the door lock.
4

Service

4.1

Manually Opening Door Lock A2

Note:
Manual opening is only required when the door locking mechanism is
locked with the door open.
This happens if the locking mechanism is interfered with, e.g., if an object is
pushed into it.
In this situation, the locking latch cannot push into the lock and the door
can't be closed.
With the front panel in place, and the door lock and door seal installed, press
the door locking mechanism open.

Figure 020-1: Manually Opening the Door Lock

18
W 48xx