Table of Contents
Advertisement
Technical Information
Note:
Refer to the operating instructions to activate/deactivate the electronic child
safety lock.
Press the Prewash button. The display shows the program release.
3.5
Display Indicates: Appliance is Locked
Symptom:
Electromechanical door lock. The door cannot be opened by means of the
switch/the door/the lid.
Cause:
During a program cycle, the door is bolted for safety reasons.
Remedy:
End the program.
Note:
Electromechanical door lock: See Section 020-2.1.
Cause:
Suds in the suds container.
Remedy:
Activate the Pump program.
Cause:
Defective drainage.
Remedy:
Check the drain pump (M8) and drain.
Cause:
Defective water-level sensing.
Remedy:
Check the imbalance sensor (ADS).
3.6
Display Indicates: Locked, Enter Code
Symptom:
It's not possible to select a program.
Cause:
The electronic lock function is activated.
Remedy:
Note:
Electronic lock function: See the operating instructions.
Release the lock to select a program cycle: Enter code 125.
Deactivate the lock: Select the Lock function and enter code 125.
W 4840, W 4842: See Section 070-4.3.
W 4800, W 4802: See Section 070-4.1.
46
W 48xx
Advertisement
Table of Contents
