Table of Contents
Advertisement
W 48xx
Cause:
The target temperature is not reached before the Thermostop time.
Heater R1 is defective.
Remedy:
Check the heater.
Check the heater element for short circuit, open circuit and isolation.
3.20
F 34 Door Does Not Lock
Symptom:
Program does not start after the Start button is pressed.
A running program is stopped.
The door lock (A2) does not lock.
Door lock function: See Section 020-2.1.
Display message: Door lock blocked.
"Child Lock" LED flashes rapidly.
The fault will be deleted the next time the appliance is successfully unlocked.
Cause:
Drum overloaded.
Remedy:
Do not exceed the stated maximum laundry load.
Cause:
The door lock is defective.
Remedy:
1. Check the door lock contacts L / L', N / N'.
2. Check the door lock wiring harness.
3.21
F 35 Door Does Not Release
Symptom:
In the operating mode, the display indicates: Door lock blocked.
The "Child Lock" LED flashes rapidly.
Door lock function: See Section 020-2.1.
The fault will be deleted the next time the appliance is successfully unlocked.
Cause:
Drum overloaded.
Remedy:
Do not exceed the stated maximum laundry load.
Cause:
The door lock is defective.
Remedy:
1. Check the door lock contacts L / L', N / N'.
2. Check the door lock wiring harness.
53
Technical Information
Advertisement
Table of Contents
