Table of Contents
Advertisement
W 48xx
4.4
Float/Float Switch (B8) Removal
Danger!
Risk of electric shock when working on low-voltage components.
In the power electronic, there is no galvanic isolation from the power supply.
When working on a washer connected to the power supply, be aware of the
risk of potential voltage on low-voltage components.
1. Disconnect the appliance from the power supply.
2. Remove the front panel; refer to Section 010-4.3.
3. Open the switch housing and disconnect the electrical connection from
the float switch.
4. Release the microswitch (Figure 010-3, Item 1) and/or remove the float
(Figure 010-3, Item 2) from the switch housing.
Figure 010-3: Float Switch Assembly
15
Technical Information
Advertisement
Table of Contents
