Technical Data; Function; Child Safety Sensor; Table 070-1: Fascia Panel And Control Electronic Data - Miele W 4802 Technical Information

Technical Information
1

Technical Data

Control technology
Wash technology

Table 070-1: Fascia Panel and Control Electronic Data

2

Function

2.1

Child Safety Sensor

If a child or animal should be in the drum, the program sequence needs to be
interrupted and the door released electronically so that in this emergency the
door can be pushed open from the inside.
Note:
The door can only be pushed open from the inside or pulled open from the
outside as long as it is not electronically bolted.
After the program starts and until the motor is activated, the control monitors
the movements of the drum via the tachogenerator.
If a child or animal should be in the drum and it moves, this is detected
through the movement sensor. The program is interrupted for 15 minutes. If
movement is sensed again, the program is stopped.
Note:
During water intake, the tumbling laundry may activate the child safety
sensor.
Press Start to continue the program.
Control electronic
Power electronic
RemoteVision
Process technology
Current volume meter (VSZ)
Level monitor
Heater (R1)
Suds temperature sensor (R30)
Rinse sensor
Imbalance sensor
38
W 48xx
Novo IV Plus controls with keypads
and LCD display
USA: Novo IV Basic controls with
keypads: EW 100-U
ELP 255 with integrated frequency
converter
Control electronic Novotronic IV.
Update capable via optical PC
interface.
RemoteVision-ready
Hydromatic IV E, saved in ELP
Programs can be updated.
Flow meter (B3/4)
Imbalance sensor (ADS) integrated in
the power electronic (ELP)
Electrical heater
NTC
Not USA/CDN: Temperature sensor
(heater) R30 also serves as a rinse
sensor.
RPM imbalance sensor
EU: Imbalance sensor or optional path
sensor (load sensor, B1/15)