Problem solving guide
The programme is cancelled and a fault indicator light lights up
in the control panel.
Problem
The fault indicator light
lights up, and
appear alternately in the
time display and the
buzzer sounds.
The fault indicator light
lights up, and
appear alternately in the
time display and the
buzzer sounds.
The fault indicator light
lights up, and
appear alternately in the
time display and the
buzzer sounds.
and appear
alternately in the time
display and the buzzer
sounds.
50
Possible cause and remedy
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
Clean the drain filter and the pump.
The maximum drain height is 1 m.
The water inlet is blocked or restricted.
Check whether the tap is turned on properly.
Check whether the inlet hose is kinked.
Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
Clean the filter.
The water protection system has reacted.
Turn off the tap.
Call Miele.
There is a fault.
Disconnect the washing machine from the
electricity supply. Switch off at the wall and
withdraw the plug from the socket, or switch off
the mains circuit breaker.
Wait at least 2 minutes before reconnecting the
washing machine to the electricity supply.
Then switch the washing machine on again.
Restart the programme.
If the fault message appears again, contact Miele.