Regulatory Information; Directives; Product Classifications; Conformity To Standards - GE Vivid S5 User Manual

Hide thumbs Also See for Vivid S5:
Table of Contents

Advertisement

Regulatory information

Any changes to accessories, peripheral units or any other part of
the system must be approved by the manufacturer. Ignoring this
advice may compromise the regulatory approvals obtained for
CAUTION
the product.

Directives

The GE Healthcare Ultrasound product families are tested to
meet all applicable requirements in relevant EU Directives and
European/International standards.

Product Classifications

The Vivid S5/Vivid S6 ultrasound unit confirms to the following
classifications, in accordance with the IEC/EN 60601-1:6.8.1:

Conformity to Standards

To fulfill the requirements of relevant EC directives and/or
European Harmonized/International standards, the following
documents/standards have been used:
Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Council Directive 93/42/EEC concerning MDD (Medical
Devices Directive): the CE label affixed to the product
testifies compliance to this Directive.
The location of the CE marking is specified in "Device
labels" on page 22.
According to 93/42/EEC Medical Device Directive, this is
Class IIa Medical Device.
According to IEC/EN 60601-1, Equipment is Class I, Type
B with BF or CF Applied Parts.
According to CISPR 11, this is Group 1, Class B ISM
Equipment.
According to IEC 60529, the footswitch rate IPx8 is suitable
for use in surgical rooms.
Classification according to the degree of protection against
ingress of water as detailed in the current edition of IEC 529
(section 6.1.1): Ordinary for Main Unit (PC), IPX1, IPX7,
IPX8 for ultrasound probes (transducers).
International Electrotechnical Commission (IEC).
Safety
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vivid s6

Table of Contents