Continuous Capture Mode - GE Vivid S5 User Manual

1. Timers display
Figure 5-4: The timers in the acquisition screen
•
•
Both T1 and T2 timers can be manually stopped and restarted
during the acquisition from the System Menu (Press
the control panel).
The display of T1 and T2 is user-configurable (see page 225).

Continuous capture mode

Continuous capture mode enables the user to perform
acquisition continuously for all views at any level depending on
the selected template configuration. Continuous capture
consists of temporary saving images acquired in a storage
buffer. To enable best possible use of the limited storage buffer
capacity, a Pause/Capture mode is provided, as opposed to the
normal Freeze/Scan mode. The Pause mode enables scanning
Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
T1 displays the elapsed time from the start of the stress
examination.
T2 starts when entering live scanning on the second stress
level
Stress Echo
on
MENU
205