System Extension - Bosch DICENTIS Hardware Installation Manual

10 en | System installation overview
3.2

System extension

The DICENTIS Conference System is scalable from small to medium to large. This section
describes what a small, medium and large system is and what the requirements are for these
systems:
A small DICENTIS Conference System (see Typical system setup, page 8) consists of:
–
–
–
–
A medium DICENTIS Conference System consists of:
–
–
–
–
–
A large DICENTIS Conference System consists of:
–
–
Device
DICENTIS server
DICENTIS meeting application
DICENTIS Audio Powering Switch
DICENTIS Powering Switch
DICENTIS multimedia device
DICENTIS discussion device
DICENTIS discussion device select language
DICENTIS discussion device voting
DICENTIS discussion device extended
ARNI‑E OMNEO interface
ARNI‑S OMNEO interface
Table 3.1: Nodes count of DICENTIS equipment
2016.09 | V1.4 |
up to 100 DICENTIS devices.
all DICENTIS devices in 1 subnet.
1 DICENTIS Audio Powering Switch for the audio processing.
1 Server PC which hosts the DICENTIS services.
up to 450 DICENTIS nodes.
Refer to table X about the node count of DICENTIS equipment.
all DICENTIS devices in 1 subnet.
1 DICENTIS Audio Powering Switch for the audio processing.
1 Server PC which hosts the DICENTIS services.
1 ARNI-Standard to increase the size of the system.
up to 750 DICENTIS devices.
multiple subnets connected by use of a router/L3 switch.
– Each subnet can have up to 450 DICENTIS nodes.
Refer to the following table for the node count of DICENTIS equipment.
– The first subnet has:
- 1 DICENTIS Audio Powering Switch for the audio processing.
- 1 Server PC which hosts the DICENTIS services.
- 1 ARNI-Enterprise to increase the size of the system.
– All other subnets have 1 ARNI-Standard to increase the size of the system.
Note: There is no DICENTIS Audio Powering Switch in the other subnets.
Hardware Installation Manual
DICENTIS
Node count
0
0
1
1
2
1
1
1
1
0
0
Bosch Security Systems B.V.